We have the potential for significant snowfall in the Capital Region late this weekend and early next week.

Are you ready for this? Sure, you have your winter jacket, hat, boots, gloves and even a new shovel but is your snowblower in good running condition? Here are the Top 10 steps to make sure it is.

Q 105.7 logo
Get our free mobile app

SnowBlower.net shared some great advice for you and your snowblower. Here you have it, in no particular order.

Getty Images
Getty Images
loading...

10 - Check for Damage

  • Last Winter, or the previous several Winters, could have been rough on your machine. Cables and handles may be loose. Parts such as your auger, skids, and scraper should be checked for damage before operating.
Getty Images
Getty Images
loading...

9 - Tighten Bolts

  • A whole lot of rattling goes on while operating your machine. t’s a good idea to check bolts and screws for proper tightness. Wouldn't be a bad idea to remove the spark plugs before doing this task.
Getty Images
Getty Images
loading...

8 - Check the Oil

  • According to Consumer Reports, some older snow blowers use a mix of oil in the gas. On newer machines the oil and gas are separate. If your oil looks dark, you should give it a change.
Getty Images
Getty Images
loading...

7 - Check Tire Pressure

  • Your machine has been sitting for several months. In that time it is likely that they have lost pressure.
Getty Images
Getty Images
loading...

6 - Flip the Skid Shoes

  • First you need to find out if your machine has skid shoes. snowblower.net suggests that most two-stage snow blowers do. If there is wear, consider flipping them. Kind of like rotating the tires on your car.
Getty Images
Getty Images
loading...

5 - Inspect the Belts

  • Are they dry and cracking? Replace them.
Getty Images
Getty Images
loading...

4 - Fill the Gas Tank with Fresh Fuel

  • According to YardCare.com, you machine should use fuel that is no more than 30 days old. If this is the first use of the season your gas is probably much older than that.
Getty Images
Getty Images
loading...

3 - New Spark Plug

  • Pop your current spark plug out. If you see rust or corrosion it's a good idea to change it.
Getty Images
Getty Images
loading...

2 - Spray the Chute

  • It drives me nuts when the discharge chute gets clogged. An easy fix is to spray it with something like WD-40 prior to use.
Getty Images
Getty Images
loading...

1 - Star Your Machine

  • The moment of truth! If it starts, and I'm confident that it will, let it run for a few minutes.

Now, let it snow!

Snowblower Etiquette Every New York Should Know

Now that Snow is in the forecast more often than not, here are some things you should know about snow blowing.

10 Largest Snowfalls On Record In Albany

Can These Animals Predict Weather?

Folklore or forecast? You be the judge.

More From Q 105.7